Satellite Dish Installation - Dish network and Directv Both Offers Free Professional Installation Right Now

Satellite Dish Installation Both Directv and Dish Network right now offers free satellite TV dish installation, so you don’t need to go through any kind of hassle steps yourself.

Satellite dish installation would require your dish at home to be pointing at the satellite in the space. There are two ways in which you can do a satellite dish installation you can do it yourself or take the help of professional agencies who charge you for the satellite installation process.

There are two terms that you will frequently come across in satellite dish installation the altitude and the azimuth. These are the two angles from the earth that help you determine the view direction of a satellite from any location in earth. The receiver’s latitude, longitude and satellites geostationary longitude help determine the value of these two angles. Don’t get bogged down by the use of these technical jargons. You get these self satellite dish installation kits which basically consist of a video tape, an instruction booklet and a cable which will walk you through the whole procedure.

1. Read on and understand how you need to be doing the satellite installation in an easy manner.
2. To get started, what you will need is a satellite dish, an LNB and a receiver or a decoder. LNB, abbreviated for low-noise block converter is typically fixed in the satellite dish for reception of communications.
3. Temporarily fix your satellite dish on a mounting pole at a suitable location
4. Take the cable that came in your kit and connect it from your house where there is the receiver to where your dish is located.
5. Now connect it tight with your LNB in the satellite dish. Make sure you leave a lot of loose cable behind so that even if you adjust your dish position, there will not be a hassle.
6. Your kit might come with a polarization scale which you can use as a reference point for calculation of your polarization. Also keep the calculation of escalation
7. Check if the signal finder in your dish is working fine. Set the sensitivity of your signal finder to the half way point.
8. Till such time that your signal finder picks up an active signal, keep rotating your dish from left to right.
9. The moment you realize that you have found the right location for your dish, you immediately need to jump for locking the dish by tightening the azimuth adjustment bolts. This will ensure your dish getting stuck with your mounting pole.
10. During the entire satellite dish installation process, try and make sure that you placed your satellite receiver and TV set near the dish. Else take the help of a friend who will relay what appears on the screen when being connected with the dish. Once you have caught the right signals, freeze!
11. Bingo! Your satellite dish installation process is complete. So how much did the self installation cost for you? The normal signal meter should cost you about 15 bucks. The installation kit about 50 bucks. Plus some miscellaneous costs as well.
12. Professional satellite dish installation service providers will charge you anywhere between 100 to 200 dollars right from basic installation at home to installation of a full fledged system. For commercial offices, charges are likely to be more.

Just keep the following things in mind during the satellite dish installation process:

• If your building has tall trees, high-rise buildings by the side or hills and mountains, then you need to apply extra caution during the installation process since these might obstruct signals from connecting with the receiver. You don’t need to worry about this problem if your dish does not require a low elevation angle setting. The dish however is flexible enough to be installed in a variety of areas for best satellite connection. It’s only about finding the right location.
• Make sure you give the concrete a day or two to harden before mounting the pole for the dish installation. Try shaking the dish to check if it’s mounted sturdy.
• Make sure you have locked the dish to receive signals from the right satellite.

You will have no hassles to face if you planned everything in advance meticulously. Follow your steps and get rocking.